Instant Hot Water Recirculating Pump with Thermostat for Tanked and Tankless Water Heaters

About this item

• Advanced digital permanent magnet brush less 24v DC motor makes the pump (maintenance-free) more safe, more powerful and more durable. Super quiet pump and you almost can’t hear the pump running voice. 12 inch length connection hose 3/8-Inch Compression x 1/2 inch FIP (You can remove one cap to reveal the smaller fitting.). Up to 10% of your water bill will be saved. No more water wasted in waiting. Work well with tank and tank less waters.
• Built in check valve. The pump default temperature is 38 ℃ off and 33 ℃ on. When the water temperature in pump is below 33 ℃ (91.4F), the pump will push the cold water back to the water heater. As the temperature hits 38 ℃(100.4F), the pump will shut off automatically. Remote controller was used to set higher or lower water temperature (From 32 to 42 ℃ ). This remote controller is not included in this package and needs to be purchased separately.
• Advanced high speed recirculating pump. High flow (6.1GPM/366GPH max) and high lift (39.3ft max). It only takes a few minutes from turning on the pump until the hot water in the pipe reaches the set temperature. HBS24-12 was designed to be installed under the farthest faucet from the water heater in each loop. Lead free grade copper pump body and connectors. NSF certified. Lead free copper. Safe for drinking water. Maintenance-free. 1/2" NPT. With 10 ft cord and easy to install.
• HBS 24-12E No 60-minute extension is a version with a design for maximum energy efficiency:
• - Activate the pump a few minutes before needing hot water
• - Set the pump to "manual mode"
• - Start the pump using the middle button on the remote control or the "HAND" button on the pump
• - The pipe water will quickly reach the desired temperature, after which the pump will shut off automatically
• - Proper maintenance of your water heater will extend its lifespan and reduce frequent starts
• - Save on gas, water, and electricity with this energy-efficient pump
• Smart Pump: Three modes are available. Smart mode: Instant hot water always available. Energy-saving mode: If you don't use the hot water for some time, the pump will decrease the temperature setting point automatically. Manual mode: the most energy saving mode, just start the pump few minutes before you need the hot water. 3 running speed. Smart memory function. The pump can remember the last settings when it was powered off. Work well with the smart plug.
• Two advanced built in high accurate temperature sensors (One to measure the pipe water temperature and the other one to measure pump ambient air temperature). Protect your pipe from freezing. Make your installation easier. Save your time (One installation position). To avoid any water leaking, please make sure the plastic washers were not damaged and were installed correctly. Max. liquid temperature is 158 ℉(70℃).
• 2 year limited warranty with satisfactory solution. If you are not completely satisfied with our product, please feel free to contact our customer service team.
• 𝙉𝙎𝙁 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙚𝙙 𝙛𝙤𝙧 𝙎𝙖𝙛𝙚𝙩𝙮: Our Smart Instant Hot Water Recirculating Pump has achieved NSF certification, guaranteeing superior safety and health standards. Trust in our pump to meet industry benchmarks, providing reliable performance. With a commitment to quality, it ensures a seamless and health-conscious solution for instant hot water. Choose excellence in every aspect with our NSF certified recirculating pump.